Xorg.0.log - AArch64 rev 4
X.Org X Server 1.19.1
Release Date: 2017-01-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.0-1-ARCH aarch64
Current Operating System: Linux orangepi 3.10.65 #55 SMP PREEMPT Fri Nov 18 16:17:28 CST 2016 aarch64
Kernel command line: console=tty0 console=ttyS0,115200n8 no_console_suspend earlycon=uart,mmio32,0x01c28000 mac_addr=2a:13:a5:03:a0:06 root=/dev/mmcblk0p2 ro rootwait
Build Date: 11 February 2017 01:56:54AM
Current version of pixman: 0.34.0
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 16 19:12:18 2017
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor ""
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Allwinner A10/A13 FBDEV"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(==) Max clients allowed: 256, resource mask: 0x1fffff
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x5d4d28
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 23.0
X.Org XInput driver : 24.1
X.Org Server Extension : 10.0
(++) using VT number 7
(II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
(II) no primary bus or device found
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.19.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 10.0
(II) LoadModule: "fbturbo"
(II) Loading /usr/lib/xorg/modules/drivers/fbturbo_drv.so
(II) Module fbturbo: vendor="X.Org Foundation"
compiled for 1.19.1, module version = 0.5.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 23.0
(II) FBTURBO: driver for framebuffer: fbturbo
(WW) Falling back to old probe method for fbturbo
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.19.1, module version = 0.0.2
ABI class: X.Org Video Driver, version 23.0
(II) FBTURBO(0): using /dev/fb0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) FBTURBO(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) FBTURBO(0): Depth 24, (==) framebuffer bpp 32
(==) FBTURBO(0): RGB weight 888
(==) FBTURBO(0): Default visual is TrueColor
(==) FBTURBO(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBTURBO(0): hardware: (video memory: 7200kB)
(**) FBTURBO(0): Option "fbdev" "/dev/fb0"
(**) FBTURBO(0): Option "SwapbuffersWait" "true"
(II) FBTURBO(0): processor: Unknown
(II) FBTURBO(0): checking modes against framebuffer device...
(II) FBTURBO(0): checking modes against monitor...
(--) FBTURBO(0): Virtual size is 1280x720 (pitch 1280)
(**) FBTURBO(0): Built-in mode "current"
(==) FBTURBO(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.19.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(**) FBTURBO(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.19.1, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) FBTURBO(0): can't load 'g2d_23' kernel module
(II) FBTURBO(0): failed to enable the use of sunxi display controller
(II) FBTURBO(0): No sunxi-g2d hardware detected (check /dev/disp and /dev/g2d)
(II) FBTURBO(0): G2D hardware acceleration can't be enabled
(==) FBTURBO(0): Backing store enabled
(==) FBTURBO(0): DPMS enabled
(II) FBTURBO(0): failed to enable hardware cursor
(II) FBTURBO(0): no 3D acceleration because the driver has been compiled without libUMP
(II) FBTURBO(0): if this is wrong and needs to be fixed, please check ./configure log
(==) RandR enabled
(II) AIGLX: Screen 0 is not DRI2 capable
(EE) AIGLX: reverting to software rendering
(II) IGLX: enabled GLX_MESA_copy_sub_buffer
(II) IGLX: Loaded and initialized swrast
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device sunxi-ir (/dev/input/event2)
(**) sunxi-ir: Applying InputClass "evdev keyboard catchall"
(**) sunxi-ir: Applying InputClass "libinput keyboard catchall"
(II) LoadModule: "libinput"
(II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
(II) Module libinput: vendor="X.Org Foundation"
compiled for 1.19.1, module version = 0.24.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 24.1
(II) Using input driver 'libinput' for 'sunxi-ir'
(**) sunxi-ir: always reports core events
(**) Option "Device" "/dev/input/event2"
(**) Option "_source" "server/udev"
(II) input device 'sunxi-ir', /dev/input/event2 is tagged by udev as: Keyboard
(II) input device 'sunxi-ir', /dev/input/event2 is a keyboard
(**) Option "config_info" "udev:/sys/devices/soc.0/1f02000.s_cir/rc/rc0/input2/event2"
(II) XINPUT: Adding extended input device "sunxi-ir" (type: KEYBOARD, id 6)
(II) input device 'sunxi-ir', /dev/input/event2 is tagged by udev as: Keyboard
(II) input device 'sunxi-ir', /dev/input/event2 is a keyboard
(II) config/udev: Adding input device sunxi-ths (/dev/input/event0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device sunxi-keyboard (/dev/input/event1)
(**) sunxi-keyboard: Applying InputClass "evdev keyboard catchall"
(**) sunxi-keyboard: Applying InputClass "libinput keyboard catchall"
(II) Using input driver 'libinput' for 'sunxi-keyboard'
(**) sunxi-keyboard: always reports core events
(**) Option "Device" "/dev/input/event1"
(**) Option "_source" "server/udev"
(II) input device 'sunxi-keyboard', /dev/input/event1 is tagged by udev as: Keyboard
(II) input device 'sunxi-keyboard', /dev/input/event1 is a keyboard
(**) Option "config_info" "udev:/sys/devices/virtual/input/input1/event1"
(II) XINPUT: Adding extended input device "sunxi-keyboard" (type: KEYBOARD, id 7)
(II) input device 'sunxi-keyboard', /dev/input/event1 is tagged by udev as: Keyboard
(II) input device 'sunxi-keyboard', /dev/input/event1 is a keyboard
(II) config/udev: Adding input device MCE IR Keyboard/Mouse (sunxi-rc-recv) (/dev/input/event3)
(**) MCE IR Keyboard/Mouse (sunxi-rc-recv): Applying InputClass "evdev pointer catchall"
(**) MCE IR Keyboard/Mouse (sunxi-rc-recv): Applying InputClass "evdev keyboard catchall"
(**) MCE IR Keyboard/Mouse (sunxi-rc-recv): Applying InputClass "libinput pointer catchall"
(**) MCE IR Keyboard/Mouse (sunxi-rc-recv): Applying InputClass "libinput keyboard catchall"
(II) Using input driver 'libinput' for 'MCE IR Keyboard/Mouse (sunxi-rc-recv)'
(**) MCE IR Keyboard/Mouse (sunxi-rc-recv): always reports core events
(**) Option "Device" "/dev/input/event3"
(**) Option "_source" "server/udev"
(II) input device 'MCE IR Keyboard/Mouse (sunxi-rc-recv)', /dev/input/event3 is tagged by udev as: Keyboard Mouse
(II) input device 'MCE IR Keyboard/Mouse (sunxi-rc-recv)', /dev/input/event3 is a pointer caps
(II) input device 'MCE IR Keyboard/Mouse (sunxi-rc-recv)', /dev/input/event3 is a keyboard
(II) libinput: MCE IR Keyboard/Mouse (sunxi-rc-recv): needs a virtual subdevice
(**) Option "config_info" "udev:/sys/devices/virtual/input/input3/event3"
(II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (sunxi-rc-recv)" (type: MOUSE, id 8)
(**) Option "AccelerationScheme" "none"
(**) MCE IR Keyboard/Mouse (sunxi-rc-recv): (accel) selected scheme none/0
(**) MCE IR Keyboard/Mouse (sunxi-rc-recv): (accel) acceleration factor: 2.000
(**) MCE IR Keyboard/Mouse (sunxi-rc-recv): (accel) acceleration threshold: 4
(II) input device 'MCE IR Keyboard/Mouse (sunxi-rc-recv)', /dev/input/event3 is tagged by udev as: Keyboard Mouse
(II) input device 'MCE IR Keyboard/Mouse (sunxi-rc-recv)', /dev/input/event3 is a pointer caps
(II) input device 'MCE IR Keyboard/Mouse (sunxi-rc-recv)', /dev/input/event3 is a keyboard
(II) config/udev: Adding input device MCE IR Keyboard/Mouse (sunxi-rc-recv) (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(**) MCE IR Keyboard/Mouse (sunxi-rc-recv): Applying InputClass "evdev pointer catchall"
(**) MCE IR Keyboard/Mouse (sunxi-rc-recv): Applying InputClass "evdev keyboard catchall"
(**) MCE IR Keyboard/Mouse (sunxi-rc-recv): Applying InputClass "libinput pointer catchall"
(**) MCE IR Keyboard/Mouse (sunxi-rc-recv): Applying InputClass "libinput keyboard catchall"
(II) Using input driver 'libinput' for 'MCE IR Keyboard/Mouse (sunxi-rc-recv)'
(**) MCE IR Keyboard/Mouse (sunxi-rc-recv): always reports core events
(**) Option "Device" "/dev/input/event3"
(**) Option "_source" "_driver/libinput"
(II) libinput: MCE IR Keyboard/Mouse (sunxi-rc-recv): is a virtual subdevice
(**) Option "config_info" "udev:/sys/devices/virtual/input/input3/event3"
(II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (sunxi-rc-recv)" (type: KEYBOARD, id 9)